Chloride 100ppm Standard Solution For Use With Fire Damage Kit (500ml)

EDT directION produce a wide range of stock standards to ensure that ISE calibration is both simple, accurate saving valuable time in a busy laboratory. This particular Chloride Standard is used for calibrating the QP459 Ion Meter in the Fire Damage Chloride Test Kit.

Our stock standards are supplied in 500ml leak proof bottles. It is anticipated that the end user will prepare standard sets by serial dilution of these stock standards, however, with these specific standards that will not work as they are pre-mixed with ISAB (Ionic Strength Adjustment Buffer). Therefore a 2 point calibration would require both the 100 & 1000ppm standards specifically for the Fire Damage Test Kit.

All glassware should be clean. If glassware has been washed in tap water or in a glassware washing machine it will need to be rinsed in deionised water prior to use. Residual water causes unwanted dilution so thoroughly dry glassware prior to use.

Be careful to avoid touching the insides of glassware or containers which are used for measurement if possible. The most common contaminants are Sodium and Chloride from sweat and in some applications this may not be desirable.

Visit our YouTube Channel for more content.